Eature 680 cylinder retaining sealant: High intensity Medium viscosity, high strength. For clearance fit or interference fit, retaining sleeve, pulleys, gears, rotors, repair the hole, shaft with parts, tolerance parts; Shear strength up to 20Mpa or more; Maximum filling radial gap is less than 0.25mm
Replace the pressure welding of the valve casing, valve cover, Hot press interference fit, simplified the process of the machining precision plastic assembly. Improve the shear strength of the assembly cylindrical metal parts.
Feature Strong overall assembly parts are formed by bonding; Prevent assembly sealing surface against leakage and corrosion; Excellent bonding results with interference fit and clearance fit.
603 oil capacity: High-strength, low viscosity; A kind of common type high-strength locker sealant, resistant to oil and other pollutants; For sealing and retaining of cylindrical assembly parts, the maximum filling radial clearance is O. 13mm; Cured within 10 minutes, prevent loosening and leakage from shock and vibration and prevent corrosion between close fitting metal surfaces. 609 low-viscosity: High-strength, low viscosity; For the transition, interference fit. Retaining key with shaft, bearings, small motor rotor shaft, bushing; Improve co-ordination with the intensity of pressure; Repair worn hole shaft or tolerance parts; Optimal radial filling gap is below 0.13mm; 24 hours to provide the shear strength of 16MPa, you can easily adjust the different metal parts, bearing temperatures up to 149° C 620 high-temperature resistance: High viscosity, high strength; Retaining valve casing, injection movement sets, valve cover, cylinder, and keyway; Higher temperature to 200° C, Shear strength up to higher 19Mpa when bond steel; Locking and retaining cylindrical parts to diameter gap as 0.25mm; To prevent wear and corrosion of metal vibration, sealed to prevent leakage. 638 high intensity: The highest strength retaining glue, used for dynamic loading or cyclical loading conditions, the gap between immobilization of the shaft hole can be achieved as 0.25mm; Initial cure within 5 minutes 648 High Strength/instant Cure: High-strength, low viscosity; For occasions that operating temperature 175° C for a long time; Filling gap as 0.15mm or below; Initial cure within 5 minutes 660 parts repair: High strength, high viscosity (paste), filling large gap; Instant Cure, repair axis, end caps, keys, keyways, bearings, bushings; Repair abrasion parts, restore parts correctly, the maximum radial filling gap is 0.5mm.
Storage Stored in low temperature, cool, dry place